Friday, April 19, 2013


Orvis wants 2.25$ for a peice of craft for 3"x4.5" seriously?!?!?!?! Don't believe me? CHECK IT!!!

I am really amazed at the price gouging here. I recently pick up craft foam from Michael's for 0.89$ for a sheet 12"x18" that is 16 times the  square footage of foam for 2/5ths the price!!!! DAMN ORVIS as though the Helios 2 wasn't expensive enough.

Just goes to show that it takes a little looking around to find the right materials and save a few bucks.

Saturday, April 13, 2013

Dubbing wax from my junk drawer

Today I was tying up some soft hackle flys after watching Tight Line Productions video on a soft hackle emerger, see here (BTW Tight Line makes the best instructional videos I have found free on the interwebs. They do an amazing job of explaining everything and showing it in great detail without being boring or drawing on about how to turn the thread). The pattern calls for "touch dubbing" the dubbing mix to the line to give it that loose, buggy, shuck sorta look. Well I don't have any dubbing wax and seeing that I have no desire to go to the fly shop today (mainly because there is no such thing as just buying dubbing wax when visiting the fly shop) I needed to come up with a solution.

Chapstick my friends.

 I have been addicted to the stuff since I was a kid. I didn't want to use my usual stuff since it has a strong sent and is petroleum based so I went digging for an old tube of bee's wax based chapstick. Sure enough in my junk drawer I found a tube that had been through the wash so all of its scent was gone and its rather weird reconstituted nature meant no one was going to be using it again. Not surprisingly it worked perfectly. Dubbing wax is cheap but, this was free.

After coming up with my solution I looked up a few things and came across THIS use of a toilet wax ring for dubbing. This again required me to leave the house but, a sweet idea none the less.

Here is my take on the emerger. It's my take because this was the only soft hackle feather I had and the closest dubbing I had was to mix orange nylon made from yarn (see my previous post on that HERE) and some light tan dubbing. Also I was just given some turkey feathers from my brother and was eager to give those a spin.

Tuesday, April 9, 2013

Tenkara really is the ultimate backpacking setup

It's true I have been bit by the Tenkara bug but, don't worry I have no intentions of going to the one fly method. There is something about a Tenkara rod that just feels DIY. I don't mean in its construction; that is actaully quite impressive for the money one of these setups costs. No, I mean in the simplicity of engineering and the overall basic just use what works idea of it.

I just got back from a two night backpacking trip with my girlfriend in Henry W. Coe State Park. I asked her to be my GF 6 years ago on a overnight trip to the same park so it was a fitting anniversary trip. Since Henry Coe SP has a lot of small ponds full of bass and blue gill and a few tales of rainbow trout I of course had to bring the Tenkara setup. I didn't have a lot of time to fish because we had miles to make and the GF can only sit and read a book or watch the birds for so long before she gets bored of me hassling the fish. This is where Tenkara really shines. I am overly cautious with my gear (since I seem to break it all the time) so I still kept the rod in its case inside my pack but, even with that I had my rod out and ready to fish in under 5 minutes.So a nice lunch break along the banks of a pond gave me a solid 20 minutes of fishing and with bluegill at the other end that still meant 5 -10 fish or so.

So why does Tenkara beg for such simplicity and DIY? Well it starts with the setup itself. Its just a collapsing rod with a small bit of string called a lillian at the end. Onto that you tie your line of choice, ferled, level, horse hair, etc. etc. then a small section of 5x tippet and finally your fly. That's it and you are ready to fish!! There is just something about such simple design and ease of use that make me want to come up with easy solutions and re-purposing of items to use with my Tenkara.

The first thing I made was a small fly box out of an altoids tin. Yes, yes I know everyone ever makes DIY thing's out of altoids tins but, it is hard to find such small useful and tough containers elsewhere. Easiest way to use the tin for a fly box is to just put the flys in it and close the lid. Which actually isn't a bad idea for a small stream where all you need is caddis flys, parachute adams and a couple copper johns. However, my fumbly fingers like well organized fly box and foam to hold them in place. I had an old sleeping pad (someone gave me!!) made of tough closed cell foam that I was just using as dog pads for camping so a few slices became recycled as a fly box insert. If I ever make another one of these I may see if I can cut ridges in the foam so the dry flys don't get crushed on the bottom.

So why is a small DIY fly box inspired by Tenkara? Well as you can see in this box I have a few of each style of fly. Some drys, some wet, wooly bugger some copper john looking things (these flys are from early on in my fly tying career). I have every style of fly I need to get at most fish. Tenkara begs for simplicity and one small box that fits in my pocket with a selection of everything I need is as about as simple as it gets.

One product that Tenkara sells call a line holder falls into the DIY column of only kinda worth doing on your own. At first glance it just looks like a spool with a little foam and a few notches. So I made my own as you can see below. It works, in that it holds my line; although it just doesn't function as well as the Tenkara USA made holder. A friend let me borrow one on our last fishing trip and they just function beautifully. No matter how you wrap, which end you start from or how you want to put that line on there is always a notch, foam bit or crevasse to make that line stay of the spool and allow you to travel with it. It is really designed to allow you to close up shop real quick (say in a backpacking situation) and move to the next spot. I like the challenge of DIY but, in the same way that a Tenkara rod is perfectly designed to do what it does so are these little over priced line holders.

Using an old tippet spool I made some small notches along the outside rim of the spool and some elongated slots for the fly to hook into. I also drilled small holes on the inside part of the spool to put the end of the level line in so it can easily be wrapped. Like I said it works but, no where near as good as the commercial product.